Design principle of stainless steel elbow
Now let's have a look at the design principle of a kind of Malleable Iron Pipe Fitting - stainless steel elbow:
1. For pipes of the same material, when the bending stress is equal, the larger the diameter is, the larger the required radius of curvature will be. If the radius of curvature is the same, the bending stress of large diameter pipe is greater than that of small diameter pipe.
2. When laying the pipeline in elastic bending, the pipeline must go through a long bending section to turn an Angle, which is difficult to achieve in the construction zone with many obstacles. In addition, due to the limitation of the terrain, the stainless steel elbow cannot bend vertically along with the relief of the terrain, which will inevitably cause the pipeline to be suspended or partially buried deep.
3. In order to eliminate these defects, the stainless steel elbow must be completed by increasing the earthwork. Therefore, stainless steel elbows are used in these zones to change the direction of the pipeline.
As a Malleable Iron Pipe Fittings Manufacturer,Shijiazhuang Sunny Trading Co., Ltd. is a professional supplier of pipeline industry. We are also an export agent for some malleable iron factory and carbon steel factory. All of them are located in Hebei or Shanxi Province. With over 20 years of experience and advanced production facilities, we can meet multiple requirements of clients.
Our main products: malleable iron pipe fittings, steel pipe nipples, steel sockets, beam clamps, tube clamp fittings, hose clamps, air hose coupling & double bolt hose clamps, electrical conduit fittings, castings and other machinery products according to the customers' drawings and samples.welcome to contact us.
