As a carbon steel pipe nipples manufacturer, today we will tell you about the application and descaling technology of carbon steel pipe fittings. The so-called carbon steel is actually a kind of material, including Q235B, 20#, Q345B, etc. These materials are called carbon steel. Products such as elbows, flanges, tees, reducers and carbon steel pipe nipples made of materials are called carbon steel pipe fittings. These types of products are also mentioned in the pipe fittings. Elbows: used to change pipes As the name suggests, the direction of the bend is also the same effect of the bend is only a little larger than the bend of the bend. Flange: It is used to connect pipes or connect pipes. The flanges are provided with bolt holes. The flanges are welded to the two ends of the pipe and the flanges are connected by bolts to facilitate the replacement of the pipes. Three links: that is, three sides and three sides are all connected, and the fork for the pipe, such as a pipe, wants to make it into two directions, then use the tee. Reducing pipe: Generally, a small pipe is pressed and reduced to make a large pipe with a small head. It is used to transform a large diameter pipe into a small diameter. For example, if you have a 325 pipe, you want to connect a 219 pipe. Just use a 325 to 219 reducer connection.
Carbon Steel Pipe Nipples
The blasting and derusting of carbon steel pipe parts is carried out by the high-power motor to drive the high-speed torsion of the ejecting blade, so that the steel ball, steel sand, wire section, minerals and other abrasives can be sprayed on the carbon steel pipe under the strong centrifugal force of the motor, not only the method of ejecting carbon steel pipe parts, not only It can break the oxides, rust and dirt, and the carbon steel pipe can achieve the required uniform roughness under the impact of abrasive abrupt impact and friction.
After eruption and derusting, not only can the physical adsorption of the pipe fittings be expanded, but also the mechanical adhesion of the anti-corrosion layer to the pipe fittings can be enhanced. Therefore, eruption and derusting is an aspirational descaling method for pipeline anticorrosion. In general, shot blasting is mainly used for the rough method in the pipe fittings. Shot blasting is mainly used for the outline of carbon steel pipe.
The blasting and derusting of carbon steel pipe parts is carried out by the high-power motor to drive the high-speed torsion of the ejecting blade, so that the steel ball, steel sand, wire section, minerals and other abrasives can be sprayed on the carbon steel pipe under the strong centrifugal force of the motor, not only the method of ejecting carbon steel pipe parts, not only It can break the oxides, rust and dirt, and the carbon steel pipe can achieve the required uniform roughness under the impact of abrasive abrupt impact and friction.
After eruption and derusting, not only can the physical adsorption of the pipe fittings be expanded, but also the mechanical adhesion of the anti-corrosion layer to the pipe fittings can be enhanced. Therefore, eruption and derusting is an aspirational descaling method for pipeline anticorrosion. In general, shot blasting is mainly used for the rough method in the pipe fittings. Shot blasting is mainly used for the outline of carbon steel pipe.
The above is all the content we introduced, and we hope to help us. Our company is a professional supplier of pipe industry, mainly engaged in all kinds of malleable cast iron products and carbon steel pipe parts, such as carbon steel barrel nipple. If you would like more details, please contact us and we are happy to serve you.
